Rigging Points And Accessories; Overview; Mounting The Clamps - Barco RLM R6+ Performer R9010270 Owner's Manual

2.6

Rigging points and accessories

2.6.1

Overview

Clamps
Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this
position matches with the rigging points.
Consult a professional structural engineer prior to suspending the ceiling mount from a structure not intended for that use. Always
ensure the working load limit of the structure supporting the projector.
W
ARNING
Complete documentation
For a complete documentation consult manual R5976746.
2.6.2

Mounting the clamps

Necessary tools
Wrench 17 mm
Steps to be taken
1. Insert the mushroom head square neck bolt into the mounting hole (1). (image 2-10)
2. Slide the bolt into the groove until the exact position is reached (2).
3. Slide a washer on the bolt (3).
4. Secure with a first nut (4).
5. Turn a second nut on the bolt (5).
6. Turn the movable connecting-piece almost fully onto the bolt. Stops with a small distance between the clamp assembly and the
second nut so that the movable connecting-piece is still turnable (5).
7. Turn now the connecting-piece into the direction of the lens and secure this position by turning up the second nut. (image 2-11)
8. Turn the clamp on the movable connecting-piece.
R5976816 RLM R6+ PERFORMER 02/06/2006
:
When mounting the projector to the ceiling or to a rigging system, always mount security chains.
2. Installation Guidelines
19