Menu Bar Position; Status Bar Position - Barco iD PRO R600 Owner's Manual

6. Advanced
How to take a screenshot ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Take screenshot
5. Press ENTER
A dialog box is displayed. Press yes to confirm. (image 6-112)
A text box shows the evolution of the operation. (image 6-113, image 6-114)
Image 6-112
Image 6-114
6.9.5

Menu bar position

What can be done ?
The menu toolbar can be centered vertically , the range being from top of the screen to the middle of the screen. This can be useful
in applications where the top image content is not displayed.
How to center the menu ?
1. Press MENU to activate the Toolbar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Menu bar position menu
5. Press ENTER
6. Use ↑ or ↓ to position the menu toolbar
6.9.6

Status bar position

What can be done ?
The status bar (wizard menu) can be centered vertically , the range being from bottom of the screen to the middle of the screen.
This can be useful in applications where the bottom image content is not displayed.
How to center the menu ?
1. Press MENU to activate the Toolbar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Status bar position
5. Press ENTER
6. Use ↑ or ↓ to position the status bar
92
Image 6-113
R5976874 ID PRO R600/R600+ 21/09/2006