Starting Adaptec Storage Manager Pro
For information about installing Storage Manager Pro, refer to the
DuraStor Installation and User's Guide for your controller.
When you install Storage Manager Pro, the Adaptec Storage
Manager Pro service (ASMProServer) starts automatically and
starts each time you boot your system. This service must be
running for Storage Manager Pro to permit remote access to the
system, for notification and event logging, and for the user
interface to work.
Checking to See If the Service Is Running
If you ever start the Storage Manager Pro user interface and receive
an error message ( cannot connect to local server) , check that the
service is running.
Windows NT/2000—Click Start, point to Settings, click Control
I
Panel, double-click Services.
Windows 2000 Server and Advanced Server—Click Start, point
I
to Settings, click Control Panel, double-click Administrative
Tools, double-click Services.
The ASMProServer should be listed as Started and you should
see the Storage Manager Pro icon on your screen.
The service will be shut down automatically when you uninstall
Storage Manager Pro or during normal shutdown.
Starting the Service Manually
If the Storage Manager Pro service is not running, start it manually:
Windows NT—Click Start, point to Settings, click Control
I
Panel, and double-click Services. Select ASMProServer, and
click Start.
Windows 2000—Press Ctrl+Alt+Delete to open the Windows
I
Security dialog box. Click Task Manager, then click the
Processes tab. From the File menu, select New Task (Run...).
Type or browse for the path to ASMProServer.exe and click OK.
Getting Started
1-3