Monitoring System Status; Displaying The Event Log - Adaptec DuraStor 7220SS User Manual

Monitoring System Status

In This Chapter

Displaying the Event Log

Displaying Hardware and Configuration Information
Displaying Overall Statistics
You can monitor your system regularly to ensure that the
controller, disk drives, and arrays are working properly by:
Displaying the event log. See
I
Viewing hardware and configuration information. See
I
Displaying Overall Statistics. See
I
You can also view array and disk drive status information (see
page 2-11) and view disk drive status (see
Displaying the Event Log
The controller's event log contains important information about
the status of the controller, disk drives, and arrays. You should
check it regularly to monitor the status of your system. For more
information about specific warning and error events, see
and Error Events on page
disk drive and channel errors, see
page 7-11.
page 3-1.
page 3-7.
7-8. For information about specific SCSI
Understanding SCSI Errors on
page
page 2-12).
Warning
3
3-1
3-4
3-7
3-4.
3-1