Power Supply Configuration; Installing The Redundant Hot-Plug Power Supply Option - HP ProLiant ML350 User Manual

Power supply configuration

CAUTION:
to operate in redundant mode. Verify that all power supplies have the same part number and
label color. When the system detects mismatched power supplies, the system displays POST
messages, does not power on the new power supply, and remains in non-redundant mode.
Label color
Blue
Orange
Green

Installing the redundant hot-plug power supply option

WARNING:
power supplies should be performed only by individuals who are qualified in servicing server
equipment and trained to deal with products capable of producing hazardous energy levels.
WARNING:
each power supply or module.
WARNING:
supplies. Refer all maintenance, upgrades, and servicing to qualified personnel.
CAUTION:
are properly grounded (earthed) before beginning any installation procedure.
To install the component:
Identify the redundant power supply bay
1.
IMPORTANT:
power supply option, it is not necessary to power down the server before removing or installing
a power supply.
All power supplies installed in the server must have the same output power capacity
Output
460W
750W
1,200W
To reduce the risk of personal injury or damage to the equipment, the installation of
To reduce the risk of personal injury from hot surfaces, observe the thermal labels on
To reduce the risk of injury from electric shock hazards, do not open power
Electrostatic discharge (ESD) can damage electronic components. Be sure that you
Power supplies for the model shown are hot-pluggable. When using the redundant
("Rear panel components" on page 9).
Hardware options installation 68