Replacing a Hot-Plug Fan
To replace a hot-plug fan:
1. Extend the server from the rack. Refer to "Extending the Server from the Rack"
in Chapter 2, "Server Operations."
2. Remove access panel. Refer to "Removing the Access Panel" in Chapter 2,
"Server Operations."
3. Identify the nonfunctioning fan by checking for an amber LED on the QuickFind
Diagnostic Display or at the top of failed fan.
4. Remove the nonfunctioning fan.
Figure 4-15: Removing a hot-plug fan
HP ProLiant DL585 Server User Guide
Hardware Options Installation
4-19