4
Configuring a TACACS/TACACS+ server
Configuring a trap receiver
Select Configure > System > Management > Trap Receiver to configure a trap receiver.
FIGURE 77
The Trap Receiver display contains the following information.
IP Address
UDP Port
Delete
Modify
Community/Security
Name
96
Configuring a trap receiver
The IP Address of the route's destination.
This parameter specifies the application port used for the Syslog facility. The default is
514.
Allows you to delete the trap receiver.
Allows you to modify the data.
Arbitrary values made of two five-digit integers joined by a colon. Each string in the
community name can be a number from 0-65535.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01