Reset The White Power Switch; Select Reset / Restart From The Fault Frame - Xerox 6100BD - Phaser Color Laser Printer Manual

Reset the White Power Switch

1. Open the Processor Doors.
2. Locate Paper Tray 1.
3. The white power switch is above and to the right of the paper tray. The switch is marked with the
number 0 on the bottom and the number 1 on the top.
4. Make sure the top of the switch is depressed, or pushed down.
5. Power OFF, then power ON the machine.

Select Reset / Restart From the Fault Frame

To select Reset / Restart from the fault frame on DocuSP software version 3.x:
1. From the DocuSP for DocuTech 2000 Series 61xx (or your printer model) window, select the fault
from the Fault List that you want to reset. The Fault List is located in the upper-left corner of the
windows below the word System. The Printer Fault Clearance window is displayed for the fault you
selected.
2. Follow the instructions on the screen (the clearance instructions vary depending on the fault). Make
sure all paper has been removed from the paper path and there are no torn pieces of paper
remaining in the paper path. Select [Reset / Restart].
To select Reset from the fault frame on DocuSP software version 2.x:
1. From the DocuSP Print Services window, click [Status] from the menu. A pull-down list is displayed.
2. Select [Printer...] from the pull-down list. The Printer Faults window is displayed.
3. Click the fault from the Fault List column that you want to reset. The Printer Fault Clearance
window is displayed for the fault you selected.
4. Follow the instructions on the screen (the clearance instructions vary depending on the fault). Make
sure all paper has been removed from the paper path and there are no torn pieces of paper
remaining in the paper path. Select [Reset / Restart].
DT6180 HandyBook
Solutions in Alphabetical Order
138