Xerox 6100BD - Phaser Color Laser Printer Manual page 110

3. Remove any paper in this area.
4. Rotate the handle to the right until the handle latches into position. If the handle does not stay in
position when released, it is not latched properly.
To clear area 15:
1. On the right side of the Finisher area, locate the Bindexer Door. The Bindexer Door has a black
handle in the center of a large green sticker.
2. Open the Bindexer Door. The door opens by grasping the handle as it is moved to the left, and then
pulling the handle out.
3. Remove any paper in the three bins behind the door.
4. Close the Bindexer Door.
5. Close the left Finisher Door.
NOTE: Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the
rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper is
cleared and there are no pieces of paper left in the machine.
DT6180 HandyBook
Solutions in Alphabetical Order
110