Xerox 6100BD - Phaser Color Laser Printer Manual page 99

9. Remove any paper in this area.
10. Rotate the handle to the right until the handle latches into position. If the handle does not stay in
position when released, it is not latched properly.
To clear area 15:
11. Open the left Finisher Door using the handle above Paper Tray 3.
12. Open the Bindexer Door. The Bindexer Door, located above the Paper Tray 3 area, has a black
handle in the center of a large green sticker. Locate the green triangle pointing to a latch that is
surrounded by a light green rectangle. The door opens by grasping the handle as it is moved to the
left, and then pulling the handle out.
DT6180 HandyBook
Solutions in Alphabetical Order
99