Satisfaction Guide For Paper Tray 3 - Xerox 6100BD - Phaser Color Laser Printer Manual

Satisfaction Guide for Paper Tray 3

Stock Reliable feeds may be
expected
Size 8 x 10 inches to 17 x 11
inches (203 x 254 mm to
432 x 279 mm)
Weight Substance 16 to 110 (60 to
200 g/m2)
Capacity 2600 sheets, substance
20 (75 g/m2)
Type or Xerographic bond paper in
condition good condition
Drilled stock, fanned
thoroughly
DT6180 HandyBook
Paper Trays & Loading Media
Less reliable feeds may be
expected
Slightly curled paper
Intermixed weights
Xerox vellum
Full cut tabs
Label stock
Adhesive drafting film
Paper with reinforced edges
Suggested alternatives
Smaller or larger sizes
cannot be used.
Weights outside the limits
shown are not
recommended.
Substance 110 (200 g/m2)
must be long grain except 17
x 11 inch (432 x 279 mm)
substance 110 (200 g/m2)
which must be short grain.
Do not use excessively
curled paper
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Precut tabs - use tray 1 or 2.
Transparencies with a white
stripe, use tray 1 or 2.
Freshly printed offset prints,
use tray 3.
Refer to the "Using various
stocks" section for any stock
not defined in this guide.
22