Enable Offset Stacking - Xerox 6100BD - Phaser Color Laser Printer Manual

Enable Offset Stacking

NOTE: Before you begin you must be logged on as a System Administrator or Trusted User.
To enable Offset Stacking using DocuSP software version 3.x or above:
1. From the DocuSP for DocuTech 2000 Series for 61xx window, select [Printer Manager].
The Printer Manager window will be displayed.
2. Select the [Stacking] tab.
3. Select [Settings]. A Settings for All Stackers window will be displayed.
4. Select the boxes for the options [Collated], [Uncollated] and [Within Stack]. A check mark
will be displayed in the box if they are enabled.
5. Set how often you want the sheets to offset, under Offset Page Boundary (between 8 to
100).
6. Select [Ok].
To enable Offset Stacking using DocuSP software version 2.x or below:
1. From the DocuSP Print Services window, select [Printer Manager]. The Print Manager
window will be displayed.
2. Select [Options] on the toolbar. A menu will be displayed.
3. Select [Stacking] from the menu. The Unfinished Offset Stacking window will be
displayed.
4. Select the boxes for the options [Collated], [Uncollated] and [Within Stack]. A check mark
will be displayed in the box if they are enabled.
5. Set how often you want the sheets to offset, under Offset Page Boundary (between 8 to
100).
6. Select [Ok].
7. Select [Close].
DT6180 HandyBook
Programming Features
154