Push Down On The Stacker Safety Door - Xerox 6100BD - Phaser Color Laser Printer Manual

Push Down on the Stacker Safety Door

NOTE: If the Stacker Safety Door is stuck in the UP position then you will need to open the Finisher Top
Cover before you open the Front Doors.
1. Open the Finisher doors, by lifting up on the handle on the left side of the door and pull open
toward you. Open the right Finisher door by pulling toward you from the top or left side of the right
Finisher door.
NOTE: The Stacker Safety door is on the inside of the right Finisher door. It looks like a smoky
colored, transparent flat sheet of plastic.
2. Place your hand under the Stacker Safety door and pull down.
NOTE: When pushing the Stacker Safety door down, you may hear a loud clicking noise, this is
alright. If the door will not push down easily, a service call should be placed.
3. Once the door is completely down, close the Finisher Doors and Finisher Top Cover.
DT6180 HandyBook
Solutions in Alphabetical Order
134