Clean The Bins Exit Sensors (Q1222) - Xerox 6100BD - Phaser Color Laser Printer Manual

4. Fold a piece of A4 (8.5 x 11 inch) paper. Brush the folded piece of paper across each of these
openings to make sure the sensors are clear of any obstructions.
5. Close and latch the Bindexer Door.
6. Close the Finisher Door.

Clean the Bins Exit Sensors (Q1222)

NOTE: The Q1222 sensor is near area 17.
1. Open the Finisher Top Cover by pushing up on the handle in the top center of the cover.
2. If present, the bypass transport must be raised to gain access to the sensors.
DT6180 HandyBook
Solutions in Alphabetical Order
75