Xerox 6100BD - Phaser Color Laser Printer Manual page 120

Docutech 61xx - operator handybook
Hide thumbs Also See for 6100BD - Phaser Color Laser Printer:
Table of Contents

Advertisement

5.
Close the Bindexer Door.
To clear area 17:
6.
Open the Finisher Top Cover by lifting the handle to release the cover. Push the cover open all the
way.
7.
Under the Finisher Top Cover, locate the large silver colored transport. On the very front of the
transport is a black rod handle with a silver spring on each side.
8.
Raise the transport and manually hold this in place while you clear the paper jams.
9.
Remove any paper in the left center area of the Finisher or under the Finisher Top Cover.
10. Close the Finisher Top Cover.
11. Close the Finisher Doors.
NOTE: Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the
rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper was
cleared and there are no pieces of paper left in the machine.
DT6180 HandyBook
Solutions in Alphabetical Order
120

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents