Xerox 6100BD - Phaser Color Laser Printer Manual page 95

3. Grasp the handle and rotate it to the right.
4. Remove any paper in this area.
5. Rotate the handle to the left, to the latched position. If the handle does not stay in position when
released, it is not latched properly.
6. Close the Finisher Door.
To clear areas 12 and 13:
7. Open the Finisher Top Cover by pushing up on the handle in the top center of the cover.
8. On the left side of the Finisher Top Cover there is a mechanical assembly. There is a green handle
on the left side of this assembly. This is area 12.
DT6180 HandyBook
Solutions in Alphabetical Order
95