Check The Systems Queue Output Location And Finishing Selections - Xerox 6100BD - Phaser Color Laser Printer Manual

4. Check the Systems Queue Output Location and Finishing
Selections
NOTE: Before you begin you must be logged on as an Administrator. See the
Related Items below for additional information.
If you are using DocuSP version 3.x:
1. From the DocuSP Print Services window or the DocuSP for DocuTech 2000
Series 61xx window, select [Queue Manager]. The Queue Manager window
will be displayed.
2. Double-click on the queue you are looking at.
3. Select the [Output Tab].
4. Under the Output Location section, select [System Specified].
5. Under the Finishing section, select the Finisher / Booklet Maker you want to
send the job to.
6. Make sure there is no check mark in the box next to [Override]. You may
need to click on the box to remove the check mark.
7. Select [OK].
If you are using DocuSP version 2.x:
1. From the DocuSP Print Services window, select [Queue Manager]. The
Queue Manager window will be displayed.
2. Double-click on the queue you want to view to open the queue properties.
3. Under Extended Options, select [Output...].
4. Set the output to [System Specified]. Output Location is on the left-hand side.
5. Under the Finishing section, select the Finisher / Booklet Maker you want to
send the job to.
6. Make sure there is no check mark in the box next to [Override]. You may
need to click on the box to remove the check mark.
7. Select [OK] twice.
DT6180 HandyBook
Perform Printer Functions
145