Xerox 6100BD - Phaser Color Laser Printer Manual page 114

7. Push the Fuser Assembly into the machine until it stops.
To clear area 5:
8. To the left of Paper Tray 2 is a green handle with an arrow on it. Rotate the handle to the right, and
hold it in this position.
9. Remove all paper from the area to the left of Paper Tray 2.
10. Rotate the handle to the left.
11. Close the Processor Doors.
NOTE: Even if paper is not visible, go through the sequence to clear the paper jam. Carefully inspect the
rollers for any debris or torn pieces of paper. When clearing misfeeds, make sure a full sheet of paper was
cleared and there are no pieces of paper left in the machine.
DT6180 HandyBook
Solutions in Alphabetical Order
114