Intel® Server Board S3000PT
Generic USB
Auto
Flash Drive
Floppy
Forced FDD
Hard Disk
CD-ROM
4.3.2.2.6
PCI Screen
The PCI Screen provides fields to configure PCI add -in cards, the onboard NIC controllers, and
video options.
To access this screen from the Main screen, select Advanced | PCI .
Advanced
PCI
Onboard NIC1
Onboard NIC2
Figure 13. Setup Utility — PCI Configuration Screen Display
Setup Item
Onboard NIC1
Enabled
Disabled
Onboard NIC2
Enabled
Disabled
4.3.2.2.7
Power
The system power configurati on page provides fields to configure the power state after certain
events.
To access this screen from the Main screen, select Advanced | Power.
Revision 1.3
If Auto, the USB device less than 530MB will
be enumerated as floppy. Forced FDD option
can be used to force HDD formatted drive to
boot as FDD (e.g., ZIP drive)
Enabled / Disabled
Enabled / Disabled
Table 24. Setup Utility — PCI Configuration Screen Fields
Option
Enables or Disables the primary Network
controller.
Enables or Disables the secondary Network
controller.
Help Text
System BIOS
Comment
37
Need help?
Do you have a question about the S3000PT - Server Board Motherboard and is the answer not in the manual?