Europe (Ce Declaration Of Conformity); Australia / New Zealand; Restriction Of Hazardous Substances (Rohs); Calculated Mean Time Between Failures (Mtbf) - Intel S3000PT - Server Board Motherboard Specification

Intel® Server Board S3000PT TPS
9.3.2

Europe (CE Declaration of Conformity)

This product has been tested in accordance to , and complies with the Low Voltage Directive
(73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark
to illustrate its compliance.
9.3.3

Australia / New Zealand

This product has been tested and complies with AS/NZS 3548. The product has been marked
with the C-Tick mark to illustrate compliance.
9.4

Restriction of Hazardous Substances (RoHS)

Intel has a system in place to restrict the use o f banned substances in accordance with the
European Directive 2002/95/EC. Compliance is based on declaration that materials banned in
the RoHS Directive are either (1) below all applicable substance threshold limits or (2) an
approved/pending RoHS exemptio n applies.
Note: RoHS implementing details are not fully defined and may change.
Threshold limits and banned substances are noted below.
Quantity limit of 0.1% by mass (1000 PPM) for:
o Lead
o Mercury
o Hexavalent Chromium
o Polybrominated Biphenyls Dipheny Ethe rs (PBDE)
Quantity limit of 0.01% by mass (100 PPM) for:
o Cadmium
9.5

Calculated Mean Time Between Failures (MTBF)

The MTBF (Mean Time Between Failures) for the Intel® Server Board S3000PT as configured
from the factory is shown in the following table.
Operating Temperature
30 degrees Celsius
40 degrees Celsius
76

Table 64. Calculated MTBF Data

Design and Environmental Specifications
Calculated MTBF Value
205,000 Hours
121,000 Hours
Revision 1.3