Profile; Profile Configuration Parameters - HP StorageWorks SN6000 Command Line Interface Manual

profile

Description Creates and modifies profiles with which to customize Call Home email notification. A profile defines
the event severity level at which to generate emails, email subject and text, and email recipients.
NOTE: The Call Home service provides an email notification capability for the switch. This service
has no relationship with the HP Call Home feature, which notifies HP services.
Authority Admin session and a Callhome Edit session. For information about starting a Callhome Edit session,
see the callhome command.
Syntax
profile
copy [profile_source] [profile_destination]
create [profile]
delete [profile]
edit [profile]
rename [profile_old] [profile_new]
Operands
copy [profile_source] [profile_destination]
Creates a new profile named [profile_destination] and copies the configuration into it from the
profile given by [profile_source]. You must enter the callhome save command to save your
changes. Neither [profile_source] nor [profile_destination] can be Tech_Support_Center.
create [profile]
Creates a profile with the name given by [profile]. A profile name must begin with a letter and be
no longer than 32 characters. Valid characters are alphanumeric, _, $, ^, and -. The
Tech_Support_Center profile name is reserved. The Call Home database supports a maximum of
25 profiles. You must enter the callhome save command to save your changes.
describes the profile configuration parameters.
Table 15
Parameter
Level
Format
MaxSize
EmailSubject

Profile configuration parameters

Description
Event severity level at which to generate a Call Home email message:
• None—Generates email messages for all events.
• Warn—Generates email messages for Warning, Critical, and Alarm
events.
• Critical—Generates email messages for Critical and Alarm events.
• Alarm—Generates email messages for Alarm events only.
Level of detail to be included in the email message:
• ShortText—Includes switch and event information.
• FullText—Includes switch information, event information, Call Home
contact information, and SNMP contact information.
• Tsc1—Includes switch and event information in a format intended for
automated email readers.
Maximum number of characters allowed in the email message. Decreasing
this parameter makes it easier to read messages on small display devices
such as cell phones. The minimum is 650. The maximum and default is
2,000,000.
Subject of the email; up to 64 characters
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 175
Table 15