Zoning Clear - HP StorageWorks SN6000 Command Line Interface Manual

zoning clear

Description Clears all inactive zone sets from the volatile edit copy of the zoning database. This operand
requires a zoning edit session. This operand does not affect the non-volatile zoning database.
However, if you enter the zoning clear command followed by the zoning save command, the
non-volatile zoning database will be cleared from the switch.
TIP: The preferred method for clearing the zoning database from the switch is the reset zoning
command.
Authority Admin session and a Zoning Edit session.
Syntax
zoning clear
Examples The following is an example of the zoning clear command:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> zoning edit
SN6000 FC Switch (admin-zoning) #> zoning clear
SN6000 FC Switch (admin-zoning) #> zoning save
See also zoning save, page 317
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 307