Set Setup System; Dns Host Name Configuration Parameters - HP StorageWorks SN6000 Command Line Interface Manual

set setup system

Description Configures the network, logging, NTP server, and timer configurations on the switch.
Authority Admin session
Syntax
set setup system
dns
ipv4
ipv6
logging
ntp
timers
Operands
dns
Prompts you in a line-by-line fashion to change DNS host name configuration parameters
described in
parameter, enter a new value or press Enter to accept the current value.
Table 52
Parameter
DNSClientEnabled
DNSLocalHostname
DNSServerDiscovery
DNSServer1Address
DNSServer2Address
DNSServer3Address
DNSSearchListDiscovery
DNSSearchList1
DNSSearchList2
DNSSearchList3
DNSSearchList4
DNSSearchList5
222 Command Reference
Table 52. To configure all system parameters, omit the operand. For each

DNS host name configuration parameters

Description
Enables (True) or disables (False) the DNS client. The default is
False.
Name of local DNS server
DNS server boot method:
• 1—Static
• 2—DHCP (Dynamic Host Configuration Protocol)
• 3—DHCP version 6
The default is Static.
IP addresses (version 4 or 6) of up to three DNS servers.
DNS search list discovery method:
• Static
• DHCP for IPv4
• DHCP for IPv6
The default is Static.
A suffix that is appended to unqualified host names to extend the
DNS search. You can specify up to five search lists (or suffixes).