To display all zone sets, zones, and zone members in the active zone set and configured zone sets, enter
the zoning list command, as shown in the following example. Merged and edited zone sets are
displayed if they exist.
SN6000 FC Switch #> zoning list
Active (enforced) ZoneSet Information
ZoneSet
--------------------------------
wwn
Configured (saved in NVRAM) Zoning Information
ZoneSet
--------------------------------
wwn
70
Zoning Configuration
Zone
ZoneMember
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:c3
Zone
ZoneMember
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:16