HP StorageWorks SN6000 Command Line Interface Manual page 134

The following is an example of the capture remove command:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> callhome edit
SN6000 FC Switch (admin-callhome) #> capture remove
Capture Entries for Profile:
Index
-----
1
Please select a capture entry from the list above ('q' to quit): 1
The selected capture entry has been removed from profile
Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
See also profile, page 175
134 Command Reference
TimeOfDay DayOfWeek
--------- ---------
02:00 Sat
Tech_Support_Center
Interval
--------
1 (weeks)