Show Interface - HP StorageWorks SN6000 Command Line Interface Manual

show interface

Description Displays the status of the active network interfaces.
Authority None
Syntax
show interface
Examples The following is an example of the show interface command:
SN6000 FC Switch #> show interface
eth0
lo
248 Command Reference
Link encap:Ethernet
inet addr:10.20.116.131
inet6 addr: fd70:c154:c2df:116:2c0:ddff:fe00:27/64 Scope:Global
inet6 addr: fe80::2c0:ddff:fe00:27/64 Scope:Link
UP BROADCAST RUNNING MULTICAST
RX packets:137168 errors:0 dropped:0 overruns:0 frame:0
TX packets:2194 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:47764214 (45.5 Mb)
Link encap:Local Loopback
inet addr:127.0.0.1
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING
RX packets:3887 errors:0 dropped:0 overruns:0 frame:0
TX packets:3887 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:272461 (266.0 Kb)
HWaddr 00:C0:DD:00:00:27
Bcast:10.20.116.255
MTU:1500
TX bytes:328639 (320.9 Kb)
Mask:255.255.255.255
MTU:16436 Metric:1
TX bytes:272461 (266.0 Kb)
Mask:255.255.255.0
Metric:1