Passwd - HP StorageWorks SN6000 Command Line Interface Manual

passwd

Description Changes a user account's password.
Authority Admin account name and an Admin session to change another account's password; you can
change your own password without an Admin session.
Syntax
passwd [account_name]
Operands
[account_name]
The user account name. To change the password for an account name other than your own, you
must open an Admin session with the account name admin. If you omit [account_name], you will
be prompted to change the password for the current account name.
Examples The following is an example of the passwd command:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> passwd user2
account OLD password
account NEW password (8-20 chars)
please confirm account NEW password: ********
password has been changed.
See also user, page 297
Press 'q' and the ENTER key to abort this command.
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 173
: ********
: ********