Capture; Data Capture Configuration Parameters - HP StorageWorks SN6000 Command Line Interface Manual

capture

Description Manages the data capture configuration for the Tech_Support_Center Call Home profile. The data
capture configuration determines the time and frequency by which status and trend data are
collected from the switch and sent to recipients specified in the Tech_Support_Center profile.
Authority Admin session and Callhome Edit session. For information about starting a Callhome Edit session,
see the callhome command.
Syntax
capture
add
edit
remove
Operands
add
Adds data capture instructions to the Tech_Support_Center profile.
capture parameters.
Table 7
Parameter
TimeOfDay
DayOfWeek
Interval
edit
Opens an edit session in which to modify the data capture configuration of the
Tech_Support_Center profile. See
parameters.
remove
Removes the data capture configuration from the Test_Support_Center profile.
132 Command Reference

Data capture configuration parameters

Description
Time of day to send status and trend data to the
Tech_Support_Center profile email recipients. The format is hh:mm
on a 24-hour clock. The default 02:00.
Day of the week to send status and trend data to the
Tech_Support_Center profile email recipients. Values can be Sun,
Mon, Tue, Wed, Thur, Fri, Sat. The default is Sat.
Number of weeks between data-capture emails to the
Tech_Support_Center profile email recipients. Values can be 1–26.
The default is 1.
Table 7 for a description of the data capture configuration
Table 7 describes the data