Show Mem - HP StorageWorks SN6000 Command Line Interface Manual

show mem

Description Displays information about memory activity.
Authority None
Syntax
show mem [count]
Operands
[count]
The number of seconds for which to display memory information. If you omit [count], the value 1
is used. Displayed memory values are in 1K block units.
NOTE:
be interrupted. Therefore, avoid using large values for [count].
Examples The following is an example of the show mem command:
SN6000 FC Switch #> show mem
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b
1 0
Filesystem space in use: 41138/53188 KB (77%)
256 Command Reference
This operand will display memory activity updates until [count] is reached–it cannot
swpd free buff
0 334464 55932
cache si so
18728 0 0
bi bo in cs us sy id wa
1 0 401 57 1 2 97 0