HP SN6000 Quickstart Installation Instructions

HP SN6000
Fibre Channel Switch
Power Supply Quick Start

Installation Instructions

© Copyright 201 1 Hewlett-Packard Development Company, L.P.
Printed in the U.S.
HP Part Number: 5697- 1 309
Published: November 201 1
Edition: 2
*5697-1309*
Page 1
Overview
Congratulations on your purchase of the HP SN6000
Fibre Channel Switch power supply. This document
provides procedures for replacing SN6000 Fibre
Channel Switch power supply models SBPSFANBF,
SBPSFANFB, SBPSFAN2BF, and SBPSFAN2F. These
instructions are also available in the HP SN6000
Fibre Channel Switch Installation and Reference
Guide.
Supported switches
This power supply is for the HP SN6000 Dual Power
Supply Fibre Channel Switch.

Related documentation

For the latest documentation for the HP SN6000 Fibre
Channel Switch, see the HP website
http://www.hp.com/go/sn6000.

Before you begin

CAUTION:
• Both power supplies must have the same
air flow direction to prevent the switch
from overheating.
• To avoid overheating, do not operate the
switch with one power supply any longer
than necessary.
• This is a Class A product. In a domestic
environment, this product may cause
radio interference, in which case, the user
may be required to take adequate
measures.
Collect the required items
Required tools:
• Cross-head screwdriver, medium