Applying The Qos Policy To A User Profile; Displaying And Maintaining Qos Policies - HP FlexFabric 5700 series Configuration Manual

Configuration procedure
To apply the QoS policy to a control plane:
Step
1. Enter system view.
2. Enter control plane view.
3. Apply the QoS policy to
the control plane.

Applying the QoS policy to a user profile

You can apply a QoS policy to multiple user profiles. In one direction of each user profile, only one policy
can be applied. To modify a QoS policy already applied to a user profile, first remove the applied QoS
policy.
When you apply a QoS policy to a user profile, follow these restrictions and guidelines:
• The QoS policy supports only the car and accounting actions in its behaviors.
The QoS policy cannot be empty, because a user profile configured with an empty QoS policy
•
cannot be activated.
The switch supports two authentication methods (802.1X and MAC) for online users.
•
To apply a QoS policy to a user profile:
Step
1. Enter system view.
2. Enter user profile view.
3. Apply the QoS policy.

Displaying and maintaining QoS policies

Execute display commands in any view and reset commands in user view.
Task
Display traffic class configuration.
Command
system-view
control-plane slot slot-number
qos apply policy policy-name inbound
Command
system-view
user-profile profile-name
qos apply policy
policy-name { inbound |
outbound }
Command
display traffic classifier user-defined [ classifier-name ] [ slot
slot-number ]
24
Remarks
N/A
N/A
By default, no QoS policy
is applied to a control
plane.
Remarks
N/A
The configuration made in user profile view
takes effect only after it is successfully issued to
the driver.
By default, no QoS policy is applied to a user
profile.
Use the inbound keyword to apply the QoS
policy to the incoming traffic of the device
(traffic sent by the online users). Use the
outbound keyword to apply the QoS policy to
the outgoing traffic of the device (traffic
received by the online users).