Test Cancel - HP StorageWorks SN6000 Command Line Interface Manual

test cancel

Description Cancels a port test that is in progress.
Authority Admin session
Syntax
test cancel
port [port_number]
Operands
port [port_number]
Cancel the test for the port given by [port_number]. [port_number] can be 0–23.
Examples The following example cancels the test running on port 15:
SN6000 FC Switch (admin) #> test cancel port 15
See also test port, page 290
test status, page 292
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 289