Show Steering - HP StorageWorks SN6000 Command Line Interface Manual

show steering

Description Displays the routes that data takes in the fabric.
Authority None
Syntax
show steering [domain_id]
Operands
[domain_id]
The domain ID for which to display route information. If you omit [domain_id], the system displays
routes for all switches in the fabric.
Examples The following is an example of the show steering command:
SN6000 FC Switch #> show steering 35
DomainID
--------
35
DefaultOutPort InPort OutPort
-------------- ------ -------
18 3
5
6
7
15
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 273
16/18/16/18
18/16/18/16
16/18/16/18
16/18/16/18
18/16/18/16