Managing The Snmp Version 3 Configuration - HP StorageWorks SN6000 Command Line Interface Manual

Managing the SNMP version 3 configuration

SNMP version 3 is an interoperable, standards-based protocol for network management. SNMP version 3
provides secure access to devices using a combination of packet authentication and encryption over the
network. SNMP version 3 provides the following security features:
• Message integrity—ensures that packets have not been altered
• Authentication—ensures that the packet is coming from a valid source
• Encryption—ensures that packet contents cannot be read by an unauthorized source
To configure SNMP version 3, you must enable SNMP version 3 on the switch and create one or more
SNMP version 3 user accounts.
To enable SNMP version 3, enter the set setup snmp common command and set the
SNMPv3Enabled parameter to True:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> set setup snmp common
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
SnmpEnabled
Contact
Location
ReadCommunity
WriteCommunity
AuthFailureTrap
ProxyEnabled
SNMPv3Enabled
New Value (press ENTER to not specify value, 'q' to quit):
SnmpEnabled
Contact
Location
ReadCommunity
WriteCommunity
AuthFailureTrap
ProxyEnabled
SNMPv3Enabled
Do you want to save and activate this snmp setup? (y/n): [n] y
The following describe how to create, display, and modify SNMP version 3 user accounts.
True
<sysContact undefined>
<sysLocation undefined>
public
private
False
True
False
(True / False)
(string, max=64 chars) :
(string, max=64 chars) :
(string, max=32 chars) :
(string, max=32 chars) :
(True / False)
(True / False)
(True / False)
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 121
:
:
:
: t