Modifying A Profile; Renaming A Profile; Copying A Profile - HP StorageWorks SN6000 Command Line Interface Manual

Modifying a profile

To modify an existing Call Home profile, enter the profile edit command, as shown in the following
example:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> callhome edit
SN6000 FC Switch (admin-callhome) #> profile edit profile_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
Level
Format
MaxSize
EmailSubject
RecipientEmail
1. john.smith@domain.com
New Value (press ENTER to accept current value, 'q' to quit):
Level
Format
MaxSize
EmailSubject
RecipientEmail
1. john.smith@domain.com
2. <undefined>
The profile has been edited.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
SN6000 FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y

Renaming a profile

To rename profile_1, enter the profile rename command, as shown in the following example:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> callhome edit
SN6000 FC Switch (admin-callhome) #> profile rename profile_1 profile_4
The profile will be renamed. Please confirm (y/n): [n] y
SN6000 FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y

Copying a profile

To copy profile_1, enter the profile copy command, as shown in the following example:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> callhome edit
SN6000 FC Switch (admin-callhome) #> profile copy profile_1 profile_a
SN6000 FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
Alarm
ShortText
1000
Switch Problem
(up to 10 entries allowed)
(Alarm,Critical,Warn,None)
(1=FullText, 2=ShortText, 3=Tsc1) :
(decimal value, 650-2000000)
(string, max=64 chars, N=None)
(ex: admin@company.com, N=None)
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 113
:
:
:
:
: