Set Setup Callhome; Call Home Service Configuration Attributes - HP StorageWorks SN6000 Command Line Interface Manual

set setup callhome

Description Configures the Call Home database for managing email notifications of fabric problems.
Authority Admin session
Syntax
set setup callhome
Prompts you in a line-by-line fashion to configure the Call Home database.
Call Home configuration attributes.
Table 46

Call Home service configuration attributes

Parameter
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnabled
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEnabled
ContactEmailAddress
PhoneNumber
StreetAddress
FromEmailAddress
ReplyToEmailAddress
ThrottleDupsEnabled
Description
IP address (version 4 or 6) or DNS host name of the
primary SMTP server. The default is 0.0.0.0.
Service port number that the primary SMTP server is
monitoring for SMTP agents. The default is 25.
Enables (True) or disables (False) the primary SMTP
server. The default is False.
IP address (version 4 or 6) or DNS host name of the
secondary SMTP server. The default is 0.0.0.0.
Service port number that the secondary SMTP server is
monitoring for SMTP agents. The default is 25.
Enable (True) or disable (False) the secondary SMTP
server. The default is False.
Email address of the person to be notified to respond to
the email message. The format is account@domain.
This information is included in the email message when
the profile format is FullText.
Contact phone number to be included in the email
message text. This information is included in the email
message when the profile format is FullText.
Contact street address to be included in the email
message text. This information is included in the email
message when the profile format is FullText.
Email address that is defined as the sending address in
the From: field of the email message. The format is
account@domain. This field is required. Undeliverable
messages are returned to this address unless overridden
by the ReplayToEmailAddress parameter.
Email address that is to receive replies to the outgoing
email message. The format is account@domain. This
parameter overrides the FromEmailAddress
parameter.
Enables (True) or disables (False) the throttling of
duplicate email messages in the message queue. When
enabled, duplicate email messages that enter the queue
within 15 seconds of the original are suppressed. The
original message is sent with a report of the number of
suppressed duplicates. The default is True.
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 211
Table 46 describes the