Clear Expander-Status - HP P2000 Reference Manual

clear expander-status

Description For use by or with direction from a service technician.
Clears the counters and status for SAS expander lanes. Counters and status can be reset to a good
state for all enclosures, or for a specific enclosure whose status is Error as shown by the
expander-status
NOTE:
EMP does exist. Wait for the rescan to complete and then retry the clear operation.
Syntax
clear expander-status [enclosure ID]
Parameters enclosure ID
Optional. The enclosure number.
Example Clear the expander status for the first enclosure:
# clear expander-status enclosure 1
Success: Command completed successfully. - Expander status was cleared.
See also • show expander-status
40 Alphabetical list of commands
command.
If a rescan is in progress, the clear operation will fail with an error message saying that an
show