Reset Host-Link - HP P2000 Reference Manual

reset host-link

Description Resets specified controller host ports (channels).
For an FC host port configured to use FC-AL (loop) topology, a loop initialization primitive (LIP) is
issued.
For iSCSI, resetting a port might reset other ports.
For SAS, resetting a host port issues a COMINIT/COMRESET sequence and might reset other ports.
Syntax
reset host-link ports ports
Parameters port ports
A controller host port ID, a comma-separated list of IDs, a hyphenated range of IDs, or a
combination of these. A port ID is a controller ID and port number, and is not case sensitive. Do not
mix controller IDs in a range.
Example Reset the host link on port A1:
# reset host-link ports A1
Success: Command completed successfully. - Reset Host Link(s) on port(s) a1 from
current controller.
See also • show ports
HP P2000 G3 MSA System CLI Reference Guide 109