reset host-port-statistics
Description Resets performance statistics for controller host ports.
Syntax
reset host-port-statistics [ports ports]
Parameters ports ports
Optional. The controller ID and port number of ports to reset statistics for. For port syntax, see
Command syntax
ports.
Example Reset statistics for all controller host ports:
# reset host-port-statistics
Success: Command completed successfully.
See also
• reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset vdisk-statistics
• reset volume-statistics
• show host-port-statistics
• show ports
110 Alphabetical list of commands
on page 21. If this parameter is omitted, statistics are reset for all controller host