HP P2000 Reference Manual page 263

Jobs
Shows whether a job is running and its percent complete.
• DRSC: Disks in the vdisk are being scrubbed
• EXPD: Vdisk is being expanded
• INIT: Vdisk is initializing
• RCON: Vdisk is being reconstructed
• VRFY: Vdisk is being verified
• VRSC: Vdisk is being scrubbed
• Blank if no job is running
Job%
• 0%-99%: Percent complete of running job
• Blank if no job is running (job has completed)
Serial Number
Vdisk serial number
Drive Spin Down
Shows whether drive spin-down is enabled for the vdisk
Spin Down Delay
Shows the number of minutes after which the vdisk and its dedicated spares automatically spin down
Example Show information about all vdisks:
# show vdisks
Name Size
Job% Serial Number
-------------------------------------------------------------------------
VD1 587.1GB
41% SN
VD2 146.5GB
SN
VD3 900.1GB
0% SN
-------------------------------------------------------------------------
Basetypes • virtual-disks
• status
See also • create vdisk
• delete vdisks
• expand vdisk
• set vdisk
Free Own Pref
Drive Spin Down
116.7GB B B
Disabled
95.7GB A A
Enabled - all spinning
900.1GB B B
Disabled
RAID Disks Spr
Spin Down Delay
RAID50 6 0
0
RAID0 2 0
1
RAID1 2 0
HP P2000 G3 MSA System CLI Reference Guide 263
Chk Status Jobs
64k FTOL VRSC
64k UP
N/A OFFL INIT