Viewing System Status; Viewing Information About The System; System Properties; Enclosure Properties - HP P2000 G3 Reference Manual

5

Viewing system status

Viewing information about the system

In the Configuration View panel, right-click the system and select View > Overview. The System Overview
table shows:
• The system's health:
OK. The system is operating normally.
Degraded. At least one component is degraded.
Fault. At least one component has a fault.
N/A. Health status is not available.
• The system's total storage space
• The health, quantity, and storage space of enclosures, disks, and vdisks
• The quantity and storage space of volumes and snap pools
The quantity of snapshots and task schedules
•
• Configuration limits, licensed features, and versions of controller firmware and hardware
NOTE: If an I/O module in an MSA70 drive enclosure has a firmware revision below 2.18, the
enclosure's health is shown as degraded and the health reason identifies the I/O module that needs to be
updated.
For descriptions of storage-space color codes, see
Select a component to see more information about it.

System properties

When you select the System component a table shows the system's health, name, contact, location,
information (description), vendor name, product ID, product brand, SCSI vendor ID, and supported locales
(languages).
A second table shows the system's redundancy mode and status, and each controller's status.

Enclosure properties

When you select the Enclosure component a table shows each enclosure's health, ID, WWN, vendor,
model, and quantity of disk slots.

Disk properties

When you select the Disks component a table shows each disk's health, enclosure ID, slot number, serial
number, vendor, model, firmware revision, type, usage, status, and size. How Used values are described in
the disk properties section of

Vdisk properties

When you select the Vdisks component a table shows each vdisk's health, name, size, free space, RAID
level, status, and disk type. Status values are described in the vdisk properties section of
information about a vdisk

Volume properties

When you select the Volumes component a table shows each volume's name, serial number, size, and
vdisk name.

Snap-pool properties

When you select the Snap Pools component a table shows each snap pool's name, serial number, size,
free space, master volumes, snapshots, and vdisk name.
Viewing information about a vdisk
on page 92.
HP StorageWorks P2000 G3 MSA System SMU Reference Guide
About storage-space color codes
on page 92.
on page 33.
Viewing
89