A Settings Changed By Restore Defaults; Settings Changed By Restore Defaults - HP P2000 Reference Manual

A

Settings changed by restore defaults

This appendix summarizes the system settings that result from using the restore defaults command.
Table 91 Settings changed by restore defaults
Setting
System information settings:
• System name
• System contact
• System location
• System information
Management protocols settings:
• CLI/Telnet
• CLI/SSH
• FTP
• SNMP
• WBI/HTTP
• WBI/HTTPS
• SMI-S
• Debug
• In-band SES
Users
CLI/Telnet timeout
Tasks and schedules
Remote system definitions
MC debug logs
SC event logs
Time/date and NTP settings
Network settings
SNMP settings:
• SNMP
• SNMP trap notification level
• SNMP trap host IPs
• SNMP read community
SNMP write community
•
Value
•
Uninitialized Name
•
Uninitialized Contact
•
Uninitialized Location
•
Uninitialized Info
•
Enabled
•
Enabled
•
Enabled
•
Enabled
•
Enabled
•
Enabled
•
Enabled
•
Disabled
•
Enabled
All configured users are deleted and replaced with default user definitions
and default settings:
• User: manage; password: !manage
• User: monitor; password: !monitor
• User: ftp; password: !ftp
• Temperature scale: Celsius
• Timeout: 30 minutes
30 minutes
1
(preserved)
2
(preserved)
3
(preserved)
(preserved)
4
(preserved)
If addressing mode is Manual, IP values are preserved. If addressing mode
is DHCP, IP values are released.
•
Disabled
•
none
•
0.0.0.0
•
public
•
private
HP P2000 G3 MSA System CLI Reference Guide 435
5