HP P2000 Reference Manual page 323

Table 23 drives properties (continued)
Name Type
job-running string
job-running- string
numeric
blink uint32
speed uint32
lun uint32
smart string
smart-numeric string
dual-port uint32
error uint32
fc-p1-channel uint32
fc-p1-device-id uint32
fc-p1-node-wwn string
fc-p1-port-wwn string
fc-p1-unit- uint32
number
fc-p2-channel uint32
fc-p2-device-id uint32
fc-p2-node-wwn string
fc-p2-port-wwn string
fc-p2-unit- uint32
number
drive-down-code uint8
Description
Job running on the disk, if any.
• (blank): None.
• DRSC: The disk is being scrubbed.
• EXPD: The vdisk is being expanded.
• INIT: The vdisk is being initialized.
• RCON: The vdisk is being reconstructed.
• VRFY: The vdisk is being verified.
• VRSC: The vdisk is being scrubbed.
Numeric equivalents for job-running values.
• 0: None
•
2: INIT
•
3: RCON
•
4: VRFY
•
5: EXPD
•
6: VRSC
•
7: DRSC
• 0: The disk's locator LED is not illuminated.
• 1: The disk's locator LED is illuminated.
Not used.
Not used.
• Disabled: SMART is disabled for this disk.
• Enabled: SMART is enabled for this disk.
Numeric equivalents for smart values.
•
0: Disabled
•
1: Enabled
• 0: Single-ported disk.
• 1: Dual-ported disk.
Not used.
Port 1 channel ID.
Port 1 device ID.
Port 1 WWNN.
Port 1 WWPN.
Port 1 unit number.
Port 2 channel number.
Port 2 device ID.
Port 2 WWNN.
Port 2 WWPN.
Port 2 unit number.
Numeric code indicating why the disk is down.
HP P2000 G3 MSA System CLI Reference Guide 323