Show Volumecopy-Status - HP P2000 Reference Manual

show volumecopy-status

Description Shows information about in-progress volume copy operations. While a volume copy is in progress,
the destination volume cannot be accessed.
Syntax
show volumecopy-status [controller a|b|both]
Parameters controller a|b|both
Optional. Shows volume copy operations for volumes owned by controller A only, by controller B
only, or by either controller (both). If this parameter is omitted, all volume copy operations are
shown.
Output VC Volume Name
Destination volume name
Serial Number
Destination volume serial number
Vdisk
Destination vdisk name
Source Volume
Source volume name
Progress
Percent complete of the volume copy
Status
Indicates whether the destination volume is Unavailable or Suspended
Status-Reason
The status is Unavailable while the volume-copy is in progress. The status is Suspended if the
source volume goes offline while the copy is in progress. When the source volume comes back
online, the copy process resumes from the point where it stopped.
Example Show information about volume copies in progress for controller A:
# show volumecopy-status controller a
VC Volume Name
Status-Reason
--------------------------------------------------------------------------
MV1-copy
VC In Progress
--------------------------------------------------------------------------
Basetypes • volume-copy-status
• status
See also • abort volumecopy
• volumecopy
266 Alphabetical list of commands
Serial Number Vdisk
SN VD1
Source Volume Progress
MV1 7%
Status
Unavailable