reset volume-statistics
Description Resets performance statistics for all or specified volumes.
Syntax
reset volume-statistics [volumes]
Parameters volumes
Optional. Names or serial numbers of the volumes to reset statistics for. For volume syntax, see
Command syntax
Example Reset statistics for volume vd1_v001:
# reset volume-statistics vd1_v001
Success: Command completed successfully.
See also
• reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset host-port-statistics
• reset vdisk-statistics
• show volume-statistics
• show volumes
on page 21. If this parameter is omitted, statistics are reset for all volumes.
HP P2000 G3 MSA System CLI Reference Guide 113