Page of 9

HP P2000 Release Note

Hp msa2000 3.5-inch large form factor drive enclosure i/o module firmware o320b07 release notes.
Hide thumbs
   
HP MSA2000 3.5-inch Large Form Factor
Drive Enclosure I/O Module Firmware
O320B07 Release Notes
HP Part Number: 536919-005
Published: June 201 1
Edition: Fifth

Advertising

   Also See for HP P2000

   Related Manuals for HP P2000

   Summary of Contents for HP P2000

  • Page 1

    HP MSA2000 3.5-inch Large Form Factor Drive Enclosure I/O Module Firmware O320B07 Release Notes HP Part Number: 536919-005 Published: June 201 1 Edition: Fifth...

  • Page 2

    © Copyright 2009, 201 1 Hewlett-Packard Development Company, L.P.

  • Page 3: Operating Systems

    Version: O320B07 Description Firmware included in this package adds improvements and corrects issues found during use and additional qualification testing after initial product release. Firmware can be installed from any computer running a supported operating system with an Ethernet connection to the storage array system. For a list of supported operating systems, see Operating systems.

  • Page 4: Installation Instructions

    “Installing firmware using Smart Components — Linux environments” (page 6) “Installing firmware using the Storage Management Utility (SMU) — MSA2000 G1 environments” (page 7) “Installing firmware using the Storage Management Utility (SMU) — MSA2000 G2 and P2000 G3 environments” (page 8) “Installing firmware using FTP” (page 9)

  • Page 5

    Installation notes and best practices WARNING! Do not cycle power or restart devices during a firmware update. If the update is interrupted or there is a power failure, the module could become inoperative. If this occurs, contact technical support. The module may need to be returned to the factory for reprogramming. CAUTION: Before upgrading firmware, ensure that the system is stable and is not being reconfigured or changed in any way.

  • Page 6

    Instead of command line parameters you can use the following DOS environment variables: oa_address: set this variable for the IP address of array controller oa_username : set this variable for the username of array controller oa_password : set this variable for the password of array controller NOTE: When prompted for logon information, enter credentials for an account with management access rights.

  • Page 7

    Installing firmware using the Storage Management Utility (SMU) — MSA2000 G1 environments Place the downloaded firmware package in a temporary directory. If using a Smart Component, extract the contents of the Smart Component. In Windows — Click Extract on the first screen of the Smart Component. In Linux —...

  • Page 8

    Installing firmware using the Storage Management Utility (SMU) — MSA2000 G2 and P2000 G3 environments Place the downloaded firmware package in a temporary directory. If using a Smart Component, extract the contents of the Smart Component. In Windows — Click Extract on the first screen of the Smart Component.

  • Page 9

    Installing firmware using FTP Place the downloaded firmware package in a temporary directory. If using a Smart Component, extract the contents of the Smart Component. In Windows — Click Extract on the first screen of the Smart Component. In Linux — Enter ./CPxxxxxx.scexe --unpack=<folder name> to extract the contents of the Smart Component to the <folder name>...

Comments to this Manuals

Symbols: 0
Latest comments: