Table 91
Settings changed by restore defaults (continued)
Setting
SMTP settings:
•
Email notification
•
Email notify filter
•
Email addresses
•
Email server
•
Email domain
•
Email sender
SSL/SSH certificates
Licenses
Vdisk metadata
Host port settings:
•
FC link speed
•
FC topology
Host names and profiles
Drive spin down
Advanced settings:
•
Vdisk background scrub
•
Partner firmware upgrade
•
Utility priority
•
SMART
•
Dynamic spare configuration
•
Enclosure polling rate
•
Supercap failure
•
CompactFlash failure
•
Auto write back
•
Disk background scrub
Native Command Queuing (NCQ)
1. Factory default: no tasks or schedules.
2. Factory default: no remote system definitions.
3. Factory default: MC logs are cleared.
4. Factory default: NTP is disabled; NTP host IP address is 0.0.0.0; NTP offset is 0.
5. Factory default: IP addresses are released.
6. Factory default: certificates are initialized.
7. Factory default: host names and profiles are cleared.
8. Factory default: no action for all disks.
436 Settings changed by restore defaults
Value
•
Disabled
•
(none)
•
(none)
•
(none)
•
(none)
•
(none)
6
(preserved)
(preserved)
(preserved)
•
Auto
•
Auto
7
(preserved)
Disabled
•
Enabled
•
Enabled
•
High
8
•
(preserved)
•
Disabled
•
5 seconds
•
Enabled
•
Enabled
•
Enabled
•
Disabled
Enabled