Convert Master-To-Std - HP P2000 Reference Manual

convert master-to-std

Description Converts a specified master volume into a standard volume; that is, it disables the volume from
accepting snapshots. If the specified volume has associated snapshots, you must delete the snapshots
before converting the volume.
Syntax
convert master-to-std master-volume
Parameters master-volume
Name or serial number of the master volume to convert. For volume syntax, see
page 21.
Example Convert a master volume having no snapshots to a standard volume:
# convert master-to-std MV1
Success: Command completed successfully. - The conversion of a master volume to
a standard volume completed.
See also • delete all-snapshots
• show master-volumes
HP P2000 G3 MSA System CLI Reference Guide
Command syntax on
41