Set Volume - HP P2000 Reference Manual

set volume

Description Changes a volume's name and OpenVMS UID.
Syntax
set volume
name new-name
[ovms-uid ID]
volume
Parameters name new-name
A new name for the volume. For volume syntax, see
ovms-uid ID
For a volume to be accessed by an OpenVMS host, assign a volume ID in the range 1–32767 to
identify the volume to the host.
volume
Name or serial number of the volume to change. For volume syntax, see
page 21.
Example Rename volume V1 to V2:
# set volume name V2 V1
Success: Command completed successfully. - The volume was set.
See also • show host-maps
• show volumes
• show volume-maps
Command syntax on page 21.
Command syntax
HP P2000 G3 MSA System CLI Reference Guide 169
on