HP P2000 Reference Manual page 233
Msa system
Hide thumbs
Also See for P2000:
- Reference manual (160 pages) ,
- Deployment manual (74 pages) ,
- Release note (18 pages)
Table of Contents
Advertisement
Link Type
Type of ports used to link the primary and secondary volumes:
•
FC: FC ports.
•
iSCSI: iSCSI ports.
On Collision
Collision policy used to determine the next image to replicate when multiple replication images are
queued: Newest or Oldest.
Monitor Interval
Interval in seconds at which the primary volume should query the secondary volume.
Priority
Priority of the replication process on the replication volume: Low, Medium, or High.
Connection Status
•
Not Attempted: Communication has not been attempted to the remote volume.
•
Online: The volumes in the replication set have a valid connection but communication is not
currently active.
•
Active: Communication is currently active to the remote volume.
•
Offline: No connection is available to the remote system.
Connection Time
Date and time of the last communication with the remote volume, or N/A.
Remote link information:
Connected Ports
•
For a remote primary or secondary volume, this field shows the IDs of up to two hosts ports in the
local system that are connected to the remote system. If two ports are connected but only one is
shown, this indicates that a problem is preventing half the available bandwidth from being used.
•
For a local primary or secondary volume, this field shows N/A.
Remote Address
The address of each host port in the remote system through which the volume is accessible.
HP P2000 G3 MSA System CLI Reference Guide 233
Advertisement
Table of Contents
